LEICA TRACE ROD 50M

Baru

50m Fiberglass tracing rod designed to be used with the Leica DA220 and DA230 series Signal Transmitters. Designed to trace pipes which do not produce their own signal and which you are unable to apply a signal to (i.e. plastic pipe) - use with Leica DD120 or DD220 Smart Series Cable Locators.

The Trace Rod 50 is a flexible rod which enables the complete length of a non–metallic drain, duct or pipe to be traced when used in conjunction with an DA220 or DA230 series signal transmitters and DD100 or DD200 Smart series cable locators.

The Trace Rod is available in lengths of 50m or 80m.

The Trace Rod is connected to the signal transmitter, inserted and pushed along the utility under investigation. Using an DD100 or DD200 Smart series cable locator to locate it on the surface, you can trace pipes which do not produce their own signal and which you are unable to apply a signal to (i.e. plastic pipe).

Can be used in Line or Sonde mode to trace the route of the duct or a blockage.

Rod diameter is 4.5mm and the Sonde Tip diameter is 8mm

The Trace Rod is ideal for:

Tracing the path of small diameter pipes or drains.
Locating blockages or collapses in drains.
Locating or tracing non-metallic pipes that don't produce a signal.

No customer comments for the moment.

Tulis komentar Anda

LEICA DA220 1 WATT SIGNAL TRANSMITTER

LEICA DA220 1 WATT SIGNAL TRANSMITTER

The Leica DA signal transmitters apply a signal onto underground cables or pipes that may not carry a detectable signal. The Leica DD SMART cable locators can then be used to locate the signal from the Leica DD signal transmitter. The DA signal transmitters are compact, robust and easy-to-use. The have been designed in conjunction with the DD SMART cable locators to easily and accurately avoid, trace or locate buried cables and pipes.

Tulis komentar Anda

Produk Sejenis